Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM
Sort By:
1 2 3 ... 9
Band-It 25233 Replacement Single Bevel Edge Trimmer Blade BKSPLSH INSD CRNR TRIM MTT WHT BACKSPLASH JTRIM SMOKED PEWTER
Cloverdale Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer Fasade Backsplash Inside Corner Trim, PVC, White, Matte, 18 in L, Suitable for: Backsplash Panels Fasade J-Trim Backsplash, Thermoplastic, Smoked Pewter, 18 in L
Waddell 761 DP Shaker Peg Marine Ornamental Tiffany Fancy Post Cap Waddell OBTB32 Out Base Corner Block
Waddell Shaker Peg, Hardwood, 1/2 in Diameter, 2-1/2 in Length Appearance-grade, southern yellow pine. MCA treatment, above ground contact. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell IBTB32 Inside Base Corner Waddell OBTB52 Out Base Corner Block Waddell 762 DP Shaker Peg
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Waddell Shaker Peg, Hardwood, 1/2 in Diameter, 1-3/4 in Length
Walltuf 92586 Inside Corner Molding Walltuf 92589 Divider Molding Wall-Tuff 92588 Cap Molding
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
Walltuf 92587 Outside Corner Molding Waddell RTB35M Rosette Trim Block Waddell RTB35 Beveled Edge Rosette Trim Block
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell RTB25 Beveled Edge Rosette Trim Block Woodtite 92522 Screw 1 in American Wood PCOM-144 Common Board
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application. ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
Palram 94361 Horizontal Closure Strip Woodtite 92523 Self Drilling Screw 2 in Palram 92770 Horizontal Closure Strip
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application. Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Palram 92771 Horizontal Closure Strip Palram 92772 Vertical Closure Strip Deckorators 74815 Round Baluster Connector, Plastic, Black
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Use under Palram's corrugated panels to close off vertical edges for a finished look. Comes with stainless steel screws and will install ten classic balusters. Allows classic balusters to be secured to the rail without drilling. Can be used on both wood and composite railings. ACQ and CA compliant.
Deckorators 74834 Railing Connector, Plastic, Black Cloverdale 38265 Iron-On Granulated Edge Band With Hot Melt Palram 92520 Horizontal Closure Strip
Pre-drilled to ensure accurate attachment of the railing to the post. Connectors can be used on both railing and composite materials. Includes stainless steel screws. Use for attaching actual 1-1/2" x 3-1/2" rails. Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded. Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Deckorators 74817 Stair Connector, Plastic, Black Marine Ornamental Tiffany Acorn Post Top Marine Ornamental Tiffany Ball Post Top
Designed to work with stair angles between 30 to 35 degrees and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant. Appearance-grade, white pine. MCA treatment, above ground contact. Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.
   
 
1 2 3 ... 9