Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Sort By:
1 2 3 ... 22
Campbell T7665012 Welded Ring Campbell T5950124 Repair Lap Link National Hardware 3152BC Lap Link
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Nickel-Plated For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc
National Hardware 3152BC Lap Link SHUT COLD ZN PLTD STEEL 3/16IN LINK LAP ZINC PLTD STEEL 1/4IN
National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc Baron Chain Lap Link, Working Load Limit: 400 lb, Inside Length: 1-1/4 in, Inside Width: 1/4 in, Steel, Zinc
LINK LAP ZINC PLT STEEL 3/16IN Campbell T7665032 Welded Ring SHUT COLD ZINC PLATED 3/16IN
Baron Chain Lap Link, Working Load Limit: 240 lb, Inside Length: 1 in, Inside Width: 3/16 in, Steel, Zinc Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
Campbell T7661152 Welded Ring Campbell T7665042 Welded Ring Campbell T7660841 Welded Ring
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Nickel-Plated Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc
National Hardware 3152BC Lap Link SHUT COLD ZN PLTD STEEL 1/4IN Fehr Bros 1/4IN Anchor Shackle
National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc Baron Cold Shut, Working Load Limit: 750 lb, Trade Size: 1/4 in, Steel, Zinc Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
SPRING SNAP STEEL ZN 3/16 SHUT COLD ZN PLTD STEEL 5/16IN Campbell T4900424 Cold Shut
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Baron 1407 Open Eye Spring Snap SPRING SNAP RNDEYE SWVL 1/4 Baron 2450-1/4 Snap Link
Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 3-3/8 in L Baron Spring Snap, Working Load Limit: 20 lb, Snap Opening Size: 3/16 in, Steel, Zinc, Dimensions: 1-7/8 in L Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device.
SPRING SNAP RNDEYE SWVL 3/8 Midland Big Orange 081163/MC645G Anchor Shackle Campbell T4900524 Cold Shut
Baron Spring Snap, Working Load Limit: 45 lb, Zinc, Nickel, Dimensions: 2-5/8 in L Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
BREACHING SNAP ZN 2-1/2 Campbell T7661361 Welded Ring Campbell T7665001 Welded Ring
Baron Bit Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/2 in L Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2-1/2 in ID, Chain Size: #2, Steel, Zinc Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-Plated
National Hardware 3153BC Cold Shut National Hardware 3153BC Cold Shut SHUT COLD ZINC PLATED 3/8IN
National Hardware 3153BC Cold Shut, Working Load Limit: 1250 lb, Trade Size: 1/4 in, Steel, Zinc National Hardware 3153BC Cold Shut, Working Load Limit: 1900 lb, Trade Size: 5/16 in, Steel, Zinc Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
   
 
1 2 3 ... 22