|
|
|
|
|
|
National Hardware N220-350 Mending Brace, 8 in L, 7/8 in W, Steel, Galvanized, Screw Mounting
|
|
|
Designed for reinforcing, attaching, connecting and splicing panels and other home and industrial applications. Product design allows for quick and easy repair of general. household items. Screw holes are countersunk. Boxed loose barcoded.
|
|
|
|
|
|
|
|
|
|
TIE PLATE HEAVY ZMAX 3 X 7IN - Case of 25
|
|
|
The HTP is designed to resist tension when installed on the side of 2 x 4 or larger members. This heavy tie plate is ideal for a variety of applications including connecting two members end-to-end or attaching multiple members together. The HTP can be installed with either nails or Strong-Drive? SD connector screws.
|
|
|
|
|
|
|
|
|
|
MENDING PLATE GALV 20GA 1X4IN - Case of 100
|
|
|
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
|
|
|
|
|
|
|
|
|
|
MENDING PLATE GALV 20GA 2X4IN - Case of 100
|
|
|
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
|
|
|
|
|
|
|
|
|
|
PLATE MENDER E-Z BLACK 4 X 4IN - Case of 6
|
|
|
The E-Z Mender is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. These fence post repair brackets allow for easy repair of rotted or damaged 4 x 4 wood posts installed in concrete or dirt. Installed in pairs, they reinforce weakened wood posts as a cost-effective alternative to replacing the post or the concrete.
|
|
|
|
|
|
|
|
|
|
FOUNDATION PLATE RETROFIT FLAT - Case of 5
|
|
|
The FRFP is designed to connect the mudsill to the foundation and provide lateral load resistance. This flat retrofit foundation plate features a design that allows the designer to maintain prescriptive requirements. The FRFP can be used by filling the three round holes or as an alternative, filling two optional triangle holes to allow designers increased loads and greater spacing.
|
|
|
|
|
|
|
|
|
|
PLATE MENDING GALV 20GA 3X6IN - Case of 100
|
|
|
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
|
|
|
|
|
|
|
|
|
|
SHIELD PLATE ZMAX 16GA 5 X 8IN - Case of 25
|
|
|
PSPN58Z and PSPN516Z protecting shield plate fastener stoppers meet IRC, IBC and the International Plumbing Code. PSPN516Z meets the code plumbing protection requirements as well as having additional fasteners if the designer chooses to use it as a track splice strap.
|
|
|
|
|
|
|
|
|
|
LAT TIE PLATE GALV 3 X 4-1/4IN - Case of 200
|
|
|
The LTP is designed to transfer shear forces for plate-to-rim board or blocking connections. This lateral tie plate can be securely installed over plywood sheathing or directly to the framing members. The LTP features strategically spaced nail holes to prevent wood splitting for single and double-top-plate applications.
|
|
|
|
|
|
|
|
|
|
LAT TIE PLATE GALV 4-1/2X5-1/8 - Case of 100
|
|
|
The LTP is designed to transfer shear forces for plate-to-rim board or blocking connections. This lateral tie plate can be securely installed over plywood sheathing or directly to the framing members. The LTP features strategically spaced nail holes to prevent wood splitting for single and double-top-plate applications.
|
|
|
|
ENAMELWARE
