|
|
|
|
|
|
Hyde 45760 Glazier Point
|
|
|
Hold glass to sash under putty. Made with a T to be pushed into wood sash with putty knife.
|
|
|
|
|
|
|
|
|
|
General 8501 Ball End Glass Cutter, 1/8 to 1/4 in Cutting Capacity, Steel Body, 5 in L
|
|
|
Cuts plate glass from 1/8 in to 1/4 in thick. Steel wheel with honed angle of 120 deg for cutting single and double strength glass. Tooth design to remove rough edges. Ball end handle for snapping of scored glass.
|
|
|
|
|
|
|
|
|
|
Plaskolite 1999999A Cutting Tool, Straight Edged Blade, Acrylic/Plastic
|
|
|
For cutting rigid plastics. The easiest and sharpest way to cut Plaskolite panes. Place a straight edge along the line to be cut. Make several cuts along the edge until the score line can be cracked with light pressure of the thumbs at the cut.
|
|
|
|
|
|
|
|
|
|
Vulcan 17001 Tile and Glass Cutter, Zinc Body, 5.125 in L
|
|
|
The Vulcan tile and glass cutter can be used to cut tile and glass. The handle is made of zinc alloy and the cutting wheel is made of tungsten carbide.
|
|
|
|
|
|
|
|
|
|
ProSource 14300 Glazing Tool, HCS
|
|
|
The ProSource glazing tool flat end are used to clean out old putty. Use V-shape end to apply and smooth new putty. The blade is made of high carbon steel.
|
|
|
|
|
|
|
|
|
|
Fletcher 01-115/01ACP Straight End Glass Cutter, 2 to 3 mm Cutting Capacity, Steel Body
|
|
|
Fletcher's handheld glass cutters are designed and manufactured for the industries of glass and glazing, hardware, glass fabricators, stain glass and glass float plants.
|
|
|
|
|
|
|
|
|
|
Fletcher 01-122/02ACP Ball End Glass Cutter, 2 to 3 mm Cutting Capacity, Steel Body
|
|
|
Fletcher's handheld glass cutters are designed and manufactured for the industries of glass and glazing, hardware, glass fabricators, stain glass and glass float plants.
|
|
|
|
|
|
|
|
|
|
Fletcher 01-128/07-CP Ball End Glass Cutter, 0.75 to 1.5 mm Cutting Capacity, Steel Body
|
|
|
Fletcher's handheld glass cutters are designed and manufactured for the industries of glass and glazing, hardware, glass fabricators, stain glass and glass float plants.
|
|
|
|
|
|
|
|
|
|
Hyde 45730 Cutting Tool, Plastic/Steel
|
|
|
Score sheet plastic, acrylics and laminated fiberglass as well as thin copper and aluminum. Scoring edge is double-bevel ground. Plastic handle grip.
|
|
|
|
|
|
|
|
|
|
Hyde 45700 Glass Cutter, Carbide Cutting Edge, Metal Handle
|
|
|
Heavy-duty tungsten carbide cutting wheel for making straight and curved cuts in glass and mirrors. Carbide cuts clean and stays sharp. Balanced cast metal handle.
|
|
|
|
ENAMELWARE
