|
|
|
|
|
|
Louisville FS4004 Step Ladder, 102 in Max Reach H, 3-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass
|
|
|
This Louisville 4 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
Louisville FS1500 Series FS1502 Step Stool, 2-Step, 300 lb, 3 in D Step, Fiberglass, Orange/Silver
|
|
|
This Louisville 2 ft non-conductive fiberglass step stool has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with a wide top, pinch-resistant spreader braces, heavy-duty gusset bracing and angled aluminum slip-resistant rubber feet.
|
|
|
|
|
|
|
|
|
|
WERNER 6002 Step Ladder, 8 ft Max Reach H, 2-Step, 250 lb, Type I Duty Rating, 3 in D Step, Fiberglass, Blue
|
|
|
The 6002 fiberglass 2 ft step stool has a large molded top that provides a comfortable working platform. This hearty step stool has a duty rating of 250 lb and the bottom step has front and rear knee braces. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant.
|
|
|
|
|
|
|
|
|
|
WERNER 5904 Step Ladder, 8 ft Max Reach H, 3-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass, Yellow
|
|
|
The 5904 fiberglass 4 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
|
|
|
|
|
|
|
|
|
WERNER 6005 Step Ladder, 9 ft Max Reach H, 4-Step, 250 lb, Type I Duty Rating, 3 in D Step, Fiberglass, Blue
|
|
|
The 6005 fiberglass 5 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
|
|
|
|
|
|
|
|
|
LADDER STEP FBRGLS TYPE1 4FT
|
|
|
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
|
|
|
|
|
|
|
|
|
|
Werner 6204 Step Ladder, 4 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 3-Step, 8 ft Max Reach
|
|
|
The 6204 fiberglass 4 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
|
|
|
|
|
|
|
|
|
|
WERNER 5906 Step Ladder, 10 ft Max Reach H, 5-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass, Green
|
|
|
The 5906 fiberglass 6 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
|
|
|
|
|
|
|
|
|
|
Louisville FS4006 Step Ladder, 6 ft H, Type II Duty Rating, Fiberglass, 225 lb, 5-Step, 124 in Max Reach
|
|
|
This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
LADDER STEP FBRGLS TYPE1A 4FT
|
|
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
|
|
|
|
ENAMELWARE
