SAFETY SWITCHES

Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > SAFETY SWITCHES

Sort By:

Eaton DPB222RP Type ACD Molded Non-Automatic Breaker Disconnect Switch

Eaton DPB222RP Type ACD Molded Non-Automatic Breaker Disconnect Switch, 240 VAC, 60 A, 14400 W

Wholesale Price: (Members Only)

Eaton Disconnect Switch, Type ACD, Molded, Non-Automatic Breaker, Series: DP, 240 VAC, 14400 W, 60 A, 2 Poles, NEMA 3R, 8.6 in Overall Length, 5.3 in Overall Width, 3.74 in Overall Depth, Steel, Galvanized, ANSI Specified, CSA Certified, UL Listed, 1-Phase, 14 - 3 AWG Cu/Al Wire, For Outdoor Applications

Square D L111N Fusible Light Duty Safety Switch

Square D L111N Safety Switch, 1 -Pole, 30 A, 120 V, SPST, Lug Terminal

Wholesale Price: (Members Only)

Single phase, 1-pole, 2-wire, solid neutral, 120/240 VAC. Rated 2 hp at 120 VAC, with metallic enclosure. Typical loads include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. UL listed, meets NEMA standard KS1. 5 in x 7.63 in x 4 in.

Siemens LF211NU Safety Switch, 2 -Pole, 30 A, 240 V, Lug Terminal

Wholesale Price: (Members Only)

Single phase, 2-pole, 3-wire, solid neutral, 120/240 V. 10,000 AIC with plug fuses (not included). Metallic enclosure. Rated 1-1/2 hp standard/3 hp maximum. Compact size, quick-make, quick-break mechanism. Suitable for use as service entrance equipment. Cover interlock. Bottom cable entry and exit only, no hub provision supplied. Padlocking provision to lock cover closed or to lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. #14-6 AWG line, #14-8 load lug wire ranges. 5-1/2 in x 8-1/4 in x 5-13/16 in. UL listed file No.E4776, NEMA type GD, meets federal specifications WS865C.

Cutler-Hammer DG221NGB Safety Switch, 2 -Pole, 30 A, 240 V

Wholesale Price: (Members Only)

Steel enclosure. 2-pole, 3-wire, 2 blades, 2 class H cartridge fuses (not included), solid neutral, 120/240 VAC. Rated 1-1/2 to 3 hp single phase, 3 to 7-1/2 hp 3-phase at 240 V only when dual element fuses are used. For residential and commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 rms, symmetrical fault current. Bolt on hub provided. DS100GK ground kit sold separately. 6-1/6 in x 7-1/2 in x 6-3/4 in. UL listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1.

Square D D211NCP Safety Switch, 2 -Pole, 30 A, 120/240 V, DPST, Lug Terminal

Wholesale Price: (Members Only)

Single phase, 2-pole, 3-wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 VAC. With metallic enclosure for indoor use. Designed to open or close an electrical circuit in general duty applications. Rated 1-1/2 hp. For residential or commercial applications. For PK3GTA-1 field installable service ground bar kit. With plug type fuse protection. Lugs suitable for aluminum or copper conductors. Spring reinforced plated copper fuse clips. ANSI Certified and UL listed.

Square D L211N Safety Switch, 2 -Pole, 30 A, 240 V, DPST, Lug Terminal

Wholesale Price: (Members Only)

Single phase, 2-pole, 3-wire, solid neutral, 120/240 VAC. Rated 3 hp at 240 VAC, with metallic enclosure. Typical uses include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. 5 in x 7.63 in x 4 in. UL listed, meets NEMA standard KS1.

Square D L221N Safety Switch, 2 -Pole, 30 A, 240 V, DPST, Lug Terminal

Wholesale Price: (Members Only)

Single phase, 2-pole, 3 wire (2 blades, fuseholders and 1 neutral), 120/240 VAC. Rated 3 hp at 240 VAC, with metallic enclosure. 10,000 AIC (short circuit rating) with class H cartridge fuses. NEMA type 1 enclosure. Terminal lug data: (1) #12 - 6 Al or #14 - 6 Cu. wire. Service ground bar kit PKGTA1 sold separately. Padlock attachment for lock off. UL listed, meets NEMA standard KS1.

GE Electrical TG3221R Spec-Setter Safety Switches

GE TG3221R Safety Switch, 2-Pole, 30 A, 240 V

Wholesale Price: (Members Only)

Designed for residential or light commercial applications where duty is not severe. Meets or exceeds NEMA Enclosed Switch Standard KS1-1983 for type GD, CSA certified; 60 deg C/75 deg C conductor rating. Two pole, 120/240 VAC; 250 VDC. Removable closing cap. Accepts Class H fuses (not included). Feature quick make, quick break mechanism. Suitable for use as service entrance equipment when installed in accordance with National Electrical Code. 6-7/8 in x 9-7/8 in x 3-5/16 in. UL listed (Enclosed Switches No. 98).

Murray LNF222RU Non-Fusible Lever Safety Switch

Siemens LNF222RAU Safety Switch, 2 -Pole, 60 A, 240 V, Manual Actuator, Lug Terminal, Gray

Wholesale Price: (Members Only)

Siemens low voltage VBII double-break enclosed safety switch. Series A light two-pole two-wire non-fused general duty. Rated 240 V 60 A.

Cutler-Hammer DG321NRB Safety Switch, 3 -Pole, 30 A, 240 V

Wholesale Price: (Members Only)

Steel enclosure. 3-pole, 4-wire, 3 blades, 3 class H cartridge fuses (not included), solid neutral, 120/240 VAC, Rated 1-1/2 to 3 hp single phase, to 7-1/2 hp 3-phase at 240 V only when dual element fuses are used. For residential or light commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 rms, symmetrical fault current. Ample wire bending space for easier installation. DS100GK ground lug kit sold separately. 6-3/4 in x 9-1/8 in x 6-3/4 in. UL listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1.


	1