|
|
|
|
|
|
Flair-It 16841 Tube to Pipe Adapter, 1/2 in, PEX x FPT, Polyoxymethylene, White
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
Flair-It 16842 Tube to Pipe Adapter, 1/2 in, PEX x MPT, Polyoxymethylene, White
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
Flair-It 16860 Pipe Cap, 1/2 in, PEX, White
|
|
|
Used for capping off PEX fittings. Bar coded.
|
|
|
|
|
|
|
|
|
|
Flair-It PEXLOCK 16812 Pipe Elbow, 1/2 x 3/4 in, MPT, 90 deg Angle
|
|
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
|
|
|
|
|
|
|
|
|
Flair-It 16870 Tube to Pipe Adapter, 3/8 x 1/2 in, PEX x MPT, Polyoxymethylene, White
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
Flair-It 16872 Tube to Pipe Adapter, 3/4 in, PEX x MPT, Polyoxymethylene, White
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
Flair-It 16855 Coupling, 3/8 in, Compression
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
|
|
|
|
|
|
|
|
|
Flair-It PEXLOCK 16800 Tube Elbow, 1/2 in, 90 deg Angle
|
|
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
|
|
|
|
|
|
|
|
|
Flair-It 16840 Coupling, 1/2 in, Compression
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
|
|
|
|
|
|
|
|
|
Flair-It 16862 Plug Coupling, 3/8 in
|
|
|
Used for inserting a plug into the end of a pipe. Bar coded.
|
|
|
|
ENAMELWARE
