|
|
|
|
|
|
BrassCraft ProCoat Series CSSD54-12 Gas Connector, 1/2 x 1/2 in, Stainless Steel, 12 in L
|
|
|
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
|
|
|
|
|
|
|
|
|
|
BrassCraft ProCoat Series CSSL54-12 Gas Connector, 1/2 x 1/2 in, Stainless Steel, 12 in L
|
|
|
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
|
|
|
|
|
|
|
|
|
|
B & K G038SS101118RP Gas Connector, 1/2 in, MIP x FIP, Stainless Steel, 18 in L, 1/2 in OD
|
|
|
CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
|
|
|
|
|
|
|
|
|
|
B & K G014SS101136RP Gas Connector, 1/2 x 1/2 in, MIP x FIP, Stainless Steel, 36 in L
|
|
|
CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
|
|
|
|
|
|
|
|
|
|
BrassCraft ProCoat Series CSSL54-24 Gas Connector, 1/2 x 1/2 in, Stainless Steel, 24 in L
|
|
|
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
|
|
|
|
|
|
|
|
|
|
B & K G012SS151536RP Gas Connector, 3/4 x 3/4 in FIP, 0.5 psi, Stainless Steel
|
|
|
CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
|
|
|
|
|
|
|
|
|
|
B & K G038SS101136RP Gas Connector, 1/2 in, MIP x FIP, Stainless Steel, 36 in L, 1/2 in OD
|
|
|
CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
|
|
|
|
|
|
|
|
|
|
BrassCraft ProCoat Series CSSD54-24 Gas Connector, 1/2 x 1/2 in, Stainless Steel, 24 in L
|
|
|
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
|
|
|
|
|
|
|
|
|
|
B & K G038SS101148RP Gas Connector, 1/2 in, MIP x FIP, Stainless Steel, 48 in L, 1/2 in OD
|
|
|
CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
|
|
|
|
|
|
|
|
|
|
BrassCraft ProCoat Series CSSL54-18 Straight Gas Connector, 1/2 in, FIP x MIP, Stainless Steel, 18 in L, 3/8 in OD
|
|
|
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
|
|
|
|
ENAMELWARE
