|
|
|
|
|
|
Blue Point Fasteners PD19F10 Drive Pin, 0.14 in Dia Shank, 3/4 in L, Plain
|
|
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners PD13PK Drive Pin with Plastic Washer, 0.14 in Dia Shank, 1/2 in L, Knurled
|
|
|
Blue Point Fasteners Drive Pin with Plastic Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Knurled, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners PD25F10C Drive Pin, 0.14 in Dia Shank, 1 in L, Plain
|
|
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
|
|
|
|
|
|
DEWALT 50022-PWR Powder Actuated Pin, 0.145 in Dia Shank, 3/4 in L, Steel/Plastic
|
|
|
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools
|
|
|
|
|
|
|
|
|
|
DEWALT 50026-PWR Powder Actuated Pin, 0.145 in Dia Shank, 1 in L
|
|
|
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners PD38F10 Drive Pin, 0.14 in Dia Shank, 1-1/2 in L, Plain
|
|
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie PDPA PDPA-75 Drive Pin, 0.157 in Dia Shank, 3/4 in L, Steel, Galvanized
|
|
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
Ramset 1516A Drive Pin, 0.145 in Dia Shank
|
|
|
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
|
|
|
|
|
|
|
|
|
|
Ramset 00810 Washered Pin, 0.145 in Dia Shank
|
|
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
|
|
|
|
|
|
|
|
|
Blue Point Fasteners PD51F10C Drive Pin, 0.14 in Dia Shank, 2 in L, Plain
|
|
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
|
|
|
ENAMELWARE
