|
|
|
|
|
|
Forney 40102 Electrode, 1/16 in Dia, 14 in L, Steel
|
|
|
E6013 mild steel general-purpose is an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work and more.
|
|
|
|
|
|
|
|
|
|
Forney 44560 Electrode, 1/8 in Dia, 14 in L, Stainless Steel
|
|
|
E312-16 stainless alloy easy all steel specialty welding electrodes are the ultimate rods for most grades of steel using any stick electrode power source. Can be used by anyone, regardless of prior welding experience. Features a superior combination of tensile strength and elongation. The arc is so ionized that you cannot short it out. Typical applications include joining abrasions and heat and corrosion-resistant steels. Best suited to horizontal fillet welds.
|
|
|
|
|
|
|
|
|
|
Forney 32110 Stick Electrode, 1/8 in Dia
|
|
|
Forney? E7014 is suitable for welding carbon and low-alloy steels. This is a general-purpose, high deposition electrode. It operates at higher amperage than other general-purpose electrodes such as E6013. This electrode is also suitable for thinner materials where minimal penetration is sufficient. The Forney? E7014 produces a smooth and finely rippled bead pattern and easy slag release.
|
|
|
|
|
|
|
|
|
|
Forney 42453 Stick Electrode, 1/8 in Dia, 15 in L
|
|
|
General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.
|
|
|
|
|
|
|
|
|
|
Forney 42451 Stick Electrode, 5/32 in Dia, 15 in L
|
|
|
General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.
|
|
|
|
ENAMELWARE
