|
|
|
|
|
|
Seymour 69022 Pig Ring, 12.5 ga Wire, Steel, Copper
|
|
|
Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Seymour 69024 Shoat Ring, 12.5 ga Wire, Steel, Copper
|
|
|
Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Seymour 69027 Hog Ring, 12.5 ga Wire, Steel, Copper
|
|
|
Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Seymour 69300 Hog Ring, 11 ga Wire, Steel, Copper, 25/BX
|
|
|
11 ga copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings.
|
|
|
|
|
|
|
|
|
|
Seymour 69029 Hog Ring, 11 ga Wire, Steel, Copper, 65/BX
|
|
|
Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Seymour 69302 Hog Ring, 11 ga Wire, Steel, Copper, 25/BX
|
|
|
11 ga copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings.
|
|
|
|
|
|
|
|
|
|
Seymour 69045 Ring Plier, Iron Jaw, 6-1/2 in L
|
|
|
Specially designed to hold and close hog rings and ring fasteners. Made from tough malleable iron castings with zinc plated finish. Use with ring patterns No. H1, H2, H3, PBH1, PBH2, PBH3, B1, B2 and B3.
|
|
|
|
|
|
|
|
|
|
Seymour 69356 Ring Plier, Iron Jaw, 6-1/4 in L
|
|
|
Made from tough malleable iron castings with zinc plated finish. Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern No. 541, 641, 741, 742, all rings less than 3/4 in.
|
|
|
|
|
|
|
|
|
|
Seymour 69305 Ring Plier, Cast Iron Jaw, 7-3/4 in L
|
|
|
Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern No. X1, X3, H1, H2, H3, PBH1, PBH2, PBH3, B1, B2, B3.
|
|
|
|
|
|
|
|
|
|
Seymour 69324 Cage/Trap Ring, 14 ga Wire, Steel, Galvanized
|
|
|
14 ga galvanized steel for applications where moderate cost and resistance to rust are important. Slant cut for applications requiring penetration such as hog rings. Offset design allows ring to pass for complete closure. Ideal for fastening small diameter materials that could pass through a small gap.
|
|
|
|
ENAMELWARE
