|
|
|
|
|
|
DEWALT DW5226 Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 1/4 in Dia Shank, Flat Shank
|
|
|
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
|
|
|
|
|
|
|
|
|
|
DEWALT DW5229 Hammer Drill Bit, 5/16 in Dia, 12 in OAL, Percussion, 4-Flute, 5/16 in Dia Shank, Flat Shank
|
|
|
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
|
|
|
|
|
|
|
|
|
|
DEWALT DW5231 Hammer Drill Bit, 3/8 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 3/8 in Dia Shank, Flat Shank
|
|
|
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo HCBG08T Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Milled Flute, 2-Flute, 1/4 in Dia Shank
|
|
|
Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power grip shank. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon DMARG1090 Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank
|
|
|
Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.
|
|
|
|
|
|
|
|
|
|
Irwin 326007 Rotary Hammer Drill Bit, 1/4 in Dia, 12 in OAL, 2-Flute, Straight Shank
|
|
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
|
|
|
|
|
|
|
|
|
DEWALT DW5236 Hammer Drill Bit, 1/2 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 3/8 in Dia Shank, Flat Shank
|
|
|
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
|
|
|
|
|
|
|
|
|
|
Milwaukee 48-20-9012 Drill Bit, 1/4 in Dia, 12 in OAL, Wide Flute, 1/4 in Dia Shank, 3-Flat Shank
|
|
|
Our carbide hammer drill bits use sharpened carbide to deliver up to 5x life in concrete and up to 2x faster drilling into masonry material. Engineered with a precision ground tip, these bits deliver faster starts and less walking when drilling into concrete, brick and block. The carbide tipped masonry drill bits' wide flute design removes dust faster, reducing heat and delivering more holes per charge. The extended life of the MILWAUKEE? carbide hammer drill bits provides the ideal solution in concrete, brick and block.
|
|
|
|
|
|
|
|
|
|
DEWALT DW5242 Hammer Drill Bit, 5/8 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 1/2 in Dia Shank, Flat Shank
|
|
|
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon DMARG1130 Hammer Drill Bit, 3/8 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank
|
|
|
Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.
|
|
|
|
ENAMELWARE
