|
|
|
|
|
|
Arrow PT23G Pneumatic Pin Nailer
|
|
|
Arrow's PT23G pneumatic pin nailer is great for trim jobs, crafts and hobby work that require headless pin nails. The tool features a lightweight compact design, adjustable exhaust cover, contact safety and overmolded grip. PT23G comes with all necessary fittings and operates on home compressor units up to 120 psi. The easy-to-load magazine makes loading nails and clearing any jams easy, reducing project frustration and down time.
|
|
|
|
|
|
|
|
|
|
Carpenter Air Tools CP635 Pin Nailer, 100 Magazine, Strip Collation, 5/8 to 1-3/8 in Fastener
|
|
|
The CP635 pin nailer can be used for a variety of applications. It is ideal for cabinets, paneling, craft work, picture frame assembly, small moulding and trim work. It accepts 23 ga pin nails from 5/8 to 1-3/8 in.
|
|
|
|
|
|
|
|
|
|
Metabo HPT NP35AM Micro Pin Nailer, 100 Magazine, 90 deg Collation, Strip Collation, 0.02 scfm Air
|
|
|
Metabo HPT's NP35A micro pin nailer drives 23 ga headless pin nails, which produce nearly invisible holes. Lightweight and compact, the NP35A may be used in a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.
|
|
|
|
|
|
|
|
|
|
Metabo HPT Pro Series NP50AM Pin Nailer, 100 Magazine, Straight Collation, 1/2 to 2 in Fastener
|
|
|
The NP50A 23 ga PRO pin nailer has been designed with the professional carpenter in mind. It can drive 23 ga pin nails ranging from 1/2 to 2 in L. The high-grade aluminum magazine not only provides exceptional durability but also prevents jams caused by fastener overlap. The 360 deg adjustable rear exhaust has a build-in silencer to reduce noise pollution and direct air exhaust away from the user or jobsite debris. The automatic dry-fire lockout protects your work piece by not allowing the tool to operate if there are six of less pins in the magazine. The 360 deg adjustable belt hook helps keep the tool by your side at all times. The NP50A for when only the good will do.
|
|
|
|
|
|
|
|
|
|
DEWALT DWFP2350K Pin Nailer, 135 Magazine, 5/8 to 2 in Fastener
|
|
|
Our 23 ga pin nailer sets 2 in nails recessed into oak with the power and adaptability to deliver professional results. This is the ideal tool for contractors, woodworkers and cabinet builders looking to fasten materials while keeping nail visibility to a minimum. Tool free jam release and depth adjustment for easy nail removal. Pick-up this hard working pneumatic fastening tool for completing finish and trim jobs.
|
|
|
|
|
|
|
|
|
|
Metabo HPT NP18DSALTM Cordless Nailer Kit, Battery Included, 18 V, 2 Ah, 120 Magazine, 0 deg Collation, 23 ga Nail
|
|
|
The Pro preferred brand of pneumatic nailers introduces the 18 V multi-volt cordless compact 23 ga compact pin nailer - model NP18DSALT that takes fine finish carpentry to the next level. Now, with a 2 Ah battery with fuel ga, it is capable of driving 2,700 pins per charge for complete project efficiency. With this cordless nailer you no longer have to worry about hoses and compressors for your 23 ga pin nailer needs. Metabo HPT is proud to build upon its strong pneumatic heritage and offer a professional cordless option. The NP18DSALT is equipped with a built-in counterweight that virtually eliminates all recoil while reducing the force needed to actuate the tool. It also features a no-push work contact safety tip that reduces marring and provides a clean finish. Additional features include a tool-less depth of drive adjustment, dry fire lockout, belt hook, soft grip handle and tool body rubber bumpers. The NP18DSALT 18 V cordless compact 18 ga pin nailer is a part of the expanding multi-volt system of 18 V and 36 V power tools from Metabo HPT. Go lighter with 18 V batteries or go longer with the unique multi-volt battery that works on both 18 V and 36 V tools to double your runtime for up to 8 Ah of runtime per charge for more power on the go.
|
|
|
|
|
|
|
|
|
|
PINNER MICRO 23GA 1/2IN TO 2IN
|
|
|
|
|
|
|
|
|
|
|
|
|
PINNER 21LXP AL MED HEAD 21GA
|
|
|
An industrial strength slight/medium head pinner that fills the gap between 18 gauge brad nails and 23 gauge micro pins. The 21 gauge pins offer significant holding power while leaving a much smaller indent than an 18 gauge brad. Magazine automatically adjusts for different fastener length. Reversible belt hook. Rear exhaust with embedded muffler. Ergonomic handle for comfortable all-day operation. Last nail lockout prevents dry-firing. Ultra-narrow nose allows easy access to mill work and tight corners. On board storage for extra no-mar pad and jam clearing wrench. Use for applying decorative trim, molding, paneling, picture frames, rattan, trim and finish. 1/4" NPT air inlet. Weighs 3.15 lbs (1.43 kg). 8.89"H x 7.87"L x 1.85"W. Fastener capacity: 170.
|
|
|
|
ENAMELWARE
