|
|
|
|
|
|
Irwin 15070 Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge, Applicable Materials: Wood
|
|
|
Construction carbide teeth for longer life. Face ground carbide teeth for fast, clean cuts. Fully hardened plate runs truer longer. Reinforced shoulder for added durability.
|
|
|
|
|
|
|
|
|
|
Irwin 15270 Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge, Applicable Materials: Wood
|
|
|
Thin kerf saw blade for circular saws. Alternate top bevel, 2.7 mm kerf, 13 deg hook angle.
|
|
|
|
|
|
|
|
|
|
Milwaukee 48-40-1020 Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
|
|
|
Milwaukee? wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tear out in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
|
|
|
|
|
|
|
|
|
|
DeWALT DWA11024 General-Purpose Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
|
|
|
Make clean cuts with these durable large diameter circular saw blades that deliver up to 3X life. Each blade features optimized tooth geometry and ultra-sharp carbide tipped teeth for crisp, clean cutting. Manufactured to exceed expectations as you cut, the blades are specifically designed by tooth count for increased life and performance.
|
|
|
|
|
|
|
|
|
|
Diablo D1040A Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge
|
|
|
Diablo general-purpose blade is ideal for cutting oak, pine, plywood, pressure-treated lumber and beams. An excellent choice for table and miter saws, Diablo blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades or make quality crosscuts in solid wood or plywood. Great for both sliding and chop style miter saws as well as table saws.
|
|
|
|
|
|
|
|
|
|
CIRC SAW BLADE 10IN 24T RIP
|
|
|
Thin kerf saw blade for miter saw and portable tools. Designed for cutting oak, pine, plywood, pressure treated lumber and beams. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.
|
|
|
|
|
|
|
|
|
|
CIRC SAW BLADE 10 X 40 X 5/8
|
|
|
For general construction applications, including fast, efficient ripping and crosscutting. Cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding. .098" thin kerf design. 15-degree hook angle. 7,000 max RPM.
|
|
|
|
|
|
|
|
|
|
Irwin Marathon 14233 Table Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
|
|
|
Thin kerf saw blade for miter saws and table saws. No. 400 grit diamond ground teeth. Alternate top bevel, 1.6 mm plate, 0.095 in kerf, 20 deg hook angle, 5900 max rpm.
|
|
|
|
|
|
|
|
|
|
Milwaukee 48-40-1038 Circular Saw Blade, 10-1/4 in Dia, 5/8 in Arbor, 28-Teeth, Tungsten Carbide Cutting Edge
|
|
|
Milwaukee's wood cutting, framing blades maximize life and cutting efficiencies to improve your productivity. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. 10-1/4 in blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster, more efficient cuts.
|
|
|
|
|
|
|
|
|
|
Diablo D1040W Circular Saw Blade, 10-1/4 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge
|
|
|
Diablo 1-1/4 in general-purpose beam saw blade is specifically designed for use on a wormdrive saw (5/8 in diamond knockout). Cuts 4X headers and fence posts, 2X sandwiched headers, exposed beams for decks and porches and 7 sheets of 1/2 in plywood with one pass.
|
|
|
|
ENAMELWARE
