|
|
|
|
|
Bosch 85285 Router Bit, 1/4 in Dia Cutter, 1-1/2 in OAL, 1/4 in Dia Shank, 1-Cutter, Carbide
|
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Single flute trim bit allows for a faster feed rate. Solid carbide gives best rigidity and long life.
|
|
|
|
|
|
|
|
Freud 66-100 Router Bit, 3/16 in Dia, 1-1/2 in OAL, 1/4 in Dia Shank, Carbide
|
|
The 41 Series Bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
|
|
|
|
|
|
|
FLUSH TRIM ROUTER BIT
|
|
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
|
|
|
|
|
|
|
PANEL PILOT ROUTER BIT
|
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
|
|
|
|
|
|
|
Bosch 85221MC Router Bit, 1/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
Bosch 85613MC Router Bit, 1/4 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
2FLUTE STRAIGHT ROUTER BIT
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
Freud 04-111 Router Bit, 7/32 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
Bosch 85230MC Router Bit, 5/8 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
Bosch 85268MC Router Bit, 3/8 in Dia Cutter, 2-5/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|