|
|
|
|
|
|
Norton 66252835553 Cut-Off Wheel, 3 in Dia, 1/16 in Thick, 3/8 in Arbor, 36 Grit, Very Coarse, Aluminum Oxide Abrasive
|
|
|
Get a consistent performance quality and impressive bang for your buck out of this Gemini A AO-type 01/41 small diameter cut-off wheel <=3. Its high-quality aluminum oxide grain produces a versatile abrasive face that's ideal for both tough cuts through hard carbon steels and for precise incisions into softer alloys. This wheel's ultra-thin side reinforcing helps you make a straight, thin cut without encumbering the cutting edge. Ideal for 400 Series stainless steel, this cutting wheel works from either your portable cut-off tool or a handheld power drill for maximum convenience.
|
|
|
|
|
|
|
|
|
|
DEWALT DWA8050 Cut-Off Wheel, 4 in Dia, 0.045 in Thick, 5/8 in Arbor, Aluminum Oxide Abrasive
|
|
|
Built for quick, clean cuts, DeWALT-type 1 metal cutting wheels feature a thin 0.045 in wheel design for quick, burr-free cutting and 2 full sheets of fiberglass for added durability and safety. A soft aluminum oxide grain expedites cutting.
|
|
|
|
|
|
|
|
|
|
Norton 07660701617 Cut-Off Wheel, 4-1/2 in Dia, 0.04 in Thick, 7/8 in Arbor, 60 Grit, Fine, Aluminum Oxide Abrasive
|
|
|
Take it easy on operators and your budget when you use the Metal RightCut A AO-type 01/41 right-angle cut-off wheel. Its excellent balance and free cutting action lets operators cut with ease, while its low cost makes it a great choice for small jobs and inexperienced workers. Crafted with a high-quality aluminum oxide abrasive, this wheel delivers efficient, burr-free cutting of a variety of materials, including 400 Series stainless and hard- and soft carbon steels. Straight and ultra-thin, this wheel lets operators cut or grind effectively at right angles with minimal material loss.
|
|
|
|
|
|
|
|
|
|
Gator 9611 Cut-Off Wheel, 4-1/2 in Dia, 0.045 in Thick, 7/8 in Arbor, Aluminum Oxide Abrasive
|
|
|
Gator blade type 1 metal cutting wheels are designed when thin cuts are required on ferrous metals, steel and alloys. Offered in the most popular sizes for various grinders and saws.
|
|
|
|
|
|
|
|
|
|
Vortec Pro 36533 Cut-Off Wheel, 2 in Dia, 1/16 in Thick, 3/8 in Arbor, 60 Grit, Aluminum Oxide Abrasive
|
|
|
Aluminum oxide grain for fast cutting speed and easier hard metal cutting.
|
|
|
|
|
|
|
|
|
|
Avanti Pro PBD045063101F Cut-Off Disc, 4-1/2 in Dia, 7/8 in Arbor
|
|
|
Avanti Pro Cut-Off Disc, 7/8 in Arbor, 4-1/2 in Diameter, Applicable Materials: Metal
|
|
|
|
|
|
|
|
|
|
Gator 9601 Cut-Off Wheel, 4 in Dia, 0.045 in Thick, 5/8 in Arbor, A60T Grit
|
|
|
Gator Cut-Off Wheel, A60T Grit, 5/8 in Arbor, 15,200 rpm Speed, 4 in Diameter, 0.045 in Thickness, Applicable Materials: Metal, Suitable for: Angle Grinder
|
|
|
|
|
|
|
|
|
|
Diablo DBD040040101F Cut-Off Wheel, 4 in Dia, 0.04 in Thick, 5/8 in Arbor, Aluminum Oxide Abrasive
|
|
|
Diablo premium metal cut-off discs provide great performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra-long cutting life. Diablo thin kerf design provides for a thin, fast cut with minimal burr formation. Unlike other bonded discs on the market, this cut-off disc is a true 4 in design. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
Diablo DBD045040101F Cut-Off Wheel, 4-1/2 in Dia, 0.04 in Thick, 7/8 in Arbor, Aluminum Oxide Abrasive
|
|
|
Diablo premium metal cut-off discs provide great performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra-long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
Gator 9750 Cut-Off Wheel, 4-1/2 in Dia, 0.047 in Thick, 7/8 in Arbor, Aluminum Oxide Abrasive
|
|
|
Gator blade type 1 metal cutting wheels are designed when thin cuts are required on ferrous metals, steel and alloys. Offered in the most popular sizes for various grinders and saws.
|
|
|
|
ENAMELWARE
