|
|
|
|
|
|
Metabo HPT NR90ADS1M Framing Nailer, 86 to 94 Magazine, Paper Collation, 0.09 scfm Air
|
|
|
Great 3-1/2 in 30 deg paper collated framing nailer for flooring and framing, truss build-up, roof decking, wall sheathing and housing construction. The lightweight Paper Collated Framing Nailer weighs only 7 lb, making it easy to use all day, while still providing the power of bulkier, heavier nailers. The newly redesigned head guard allows for a faster and easier disassembly process, saving you valuable time during tool maintenance.
|
|
|
|
|
|
|
|
|
|
Metabo HPT NR90AES1M Framing Nailer, 64 Magazine, 21 deg Collation, Angled Collation, 2 to 3-1/2 in Fastener
|
|
|
The NR90AE(S1) framing nailer drives plastic collated nails from 2 in up to 3-1/2 in length and features Metabo HPT's next generation "industrial design." Weighing only 7.5 lb, it is easy-to-use all day, while still providing the power as other bulkier and heavier framing nailers. It can be used for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction. The redesigned head guard of the NR90AE(S1) framing nailer allows for a faster and easier disassembly process, saving valuable time during tool maintenance.
|
|
|
|
|
|
|
|
|
|
NAILER METAL CONNECTOR 1-1/2IN
|
|
|
Nosepiece probe locates metal connector holes providing accurate nail placement. Lightweight and well balanced. Dry-fire lockout. Powerful enough to drive through engineered lumber. Adjustable rafter hanger. Fastener capacity: 30, Shanks: .131"-.148", Range: 1-1/2", Collation: 34 degree paper tape strip. Tool-free adjustable exhaust deflector.
|
|
|
|
|
|
|
|
|
|
Bostitch MCN150 Metal Connector Nailer, 29 Magazine, 35 deg Collation, Paper Tape Collation, 6.7 cfm/Shot Air
|
|
|
Use this metal connector nailer STRAPSHOT? with metal framing hardware. Application is quick and precise. It is lightweight and easy to maneuver. Depend on this metal connector nailer strength and durability.
|
|
|
|
|
|
|
|
|
|
Bostitch F21PL Framing Nailer, 60 Magazine, 21 deg Collation, Plastic Strip Collation, 0.075 cfm/Shot Air
|
|
|
This 21 deg plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 21 deg plastic collated framing nailer for efficiency.
|
|
|
|
|
|
|
|
|
|
Senco 4Z0101N Framing Nailer, 83 Magazine, 34 deg Collation, Paper Tape Collation, 5.2 cfm/Shot Air
|
|
|
This well-balanced lightweight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth shank 30-34 deg paper taped strip nails. Senco XP tools are specifically engineered for demanding pros and demanding environments.
|
|
|
|
|
|
|
|
|
|
DEWALT DWF83PL Framing Nailer, 64 Magazine, 21 deg Collation, Plastic Strip Collation
|
|
|
Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Adjustable rafter hook. Lightweight at only 8 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Fastener diameter ranges from 0.113 to 0.148 in. Magazine capacity of 50 nails. Operating pressure 70 to 120 psi. Overmold grip.
|
|
|
|
|
|
|
|
|
|
DEWALT DWMC150 Connector Nailer, 29 Magazine, 35 deg Collation, Paper Tape Collation
|
|
|
At 10.5 in (26.7 cm) tall, fits conveniently inside 12 in (30.5 cm) on-center framing and other tight areas. Fastener placement made easy with exposed nail tip. Tool-free adjustable rafter hook for convenience. Low nail lockout helps prevent jamming. In-line magazine for a well balanced tool. Slip on grip. 29.0 magazine capacity. Belt/rafter hook included. Adjustable exhaust. Operating pressure of 70 to 120 psi. Lightweight tool at only 4.6 lb.
|
|
|
|
|
|
|
|
|
|
Bostitch BTF83PT Framing Nailer, 90 Magazine, 30 deg Collation, Paper Collation, 6.4 cfm/Shot Air
|
|
|
Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 90, Collation Angle: 30 deg, Collation Type: Paper, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to 3-1/4 in L, Triggering Mode: Tool-Free Selectable, Ergonomic Handle, Housing Material: Magnesium, Yellow, Dimensions: 19-3/4 in L x 5-3/4 in W x 12-3/4 in H, Includes: 3/8 in NPT Male Plug
|
|
|
|
|
|
|
|
|
|
Bostitch F28WW Framing Nailer, 100 Magazine, 28 deg Collation, Wire Weld Collation, 0.075 cfm/Shot Air
|
|
|
This 28 deg wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 28 deg wire weld framing nailer for efficiency.
|
|
|
|
ENAMELWARE
